. .

U.S. DEPARTMENT OF THE INTERIOR

BUREAU OF LAND MANAGEMENT

Oregon / Washington

GIS Metadata


BLM OR Fire History Point
FGDC Metadata
Show Definitions
Description | Spatial | Data Structure | Data Quality | Data Source | Data Distribution | Metadata
Description
Citation
Information used to reference the data.
Title: BLM OR Fire History Point
Originators: Bureau of Land Management
Publication date: 20130823
Description
A characterization of the data, including its intended use and limitations.
Abstract:
FIRE_POINT: This dataset represents points of origins of BLM fires that occur naturally (e.g., lightning) or by humans accidentally (e.g., escaped campfire) or maliciously across Oregon and Washington. The dataset includes some, but not all, historic fires (fires declared 'out' in calendar years prior to the current year). There is no lower size limit for fires to be included. In addition, many non-BLM Federal and State agencies fire origins are present.
Purpose:
This dataset is used to display historic wildfire points of origin on maps. The number and spatial extent of fire across the landscape is important information for natural resource management and planning activities. Fire points will be combined with a wide variety of other GIS datasets including habitat and special management areas for effects and impact analyses.
Supplemental information:
There is no lower size limit for fires to be included, although BLM does require capture of a final perimeter on fires 10 acres or larger in Type 1 (BLM land protected by BLM) and Type 2 (BLM land protected by another Federal agency under a cooperative agreement or contract; including mutual aid agreements) scenarios. Single tree ignitions and extremely small fires are generally omitted from FIRE_POLY and found only on FIRE_POINT. In addition, while FIRE_POINT contains fire origin points for most of the fires whose perimeters are included on FIRE_POLY, there are perimeters without a corresponding point; particularly for historic fires. It should be noted in the standard that the national standards (both BLM and Interagency) are being considered for revision and this standard should be considered interim until those updates occur.
Point Of Contact
Contact information for the individual or organization that is knowledgeable about the data.
Organization: US Forest Service
Person: Dale Guenther
Position: System Analyst
Phone: (503) 808-2188
Email: dguenther@fs.fed.us
Address type: mailing
Address:
333 Southwest First Avenue
City: Portland
State or Province: OR
Postal code: 97204
County: US
Time Period of Data
Time period(s) for which the data corresponds to the currentness reference.
Date: 20130425
Currentness reference:
publication date
Status
The state of and maintenance information for the data.
Data status: Complete
Update frequency: As needed
Key Words
Words or phrases that summarize certain aspects of the data.
Theme:
Keywords: environment
Keyword thesaurus: ISO 19115
Theme:
Keywords: Fire
Keyword thesaurus: BLM-Theme
Theme:
Keywords: Fire History, Wildfire, USFS, Fire Origin, US Forest Service
Keyword thesaurus: None
Place:
Keywords: Washington, Oregon
Keyword thesaurus: BLM-State
Data Access Constraints
Restrictions and legal prerequisites for accessing or using the data after access is granted.
Access constraints:
PUBLIC DATA: None, these data are considered public domain.
Use constraints:
These data are provided by Bureau of Land Management (BLM) "as is" and may contain errors or omissions. The User assumes the entire risk associated with its use of these data and bears all responsibility in determining whether these data are fit for the User's intended use. The information contained in these data is dynamic and may change over time. The data are not better than the original sources from which they were derived, and both scale and accuracy may vary across the data set. These data may not have the accuracy, resolution, completeness, timeliness, or other characteristics appropriate for applications that potential users of the data may contemplate. The User is encouraged to carefully consider the content of the metadata file associated with these data. These data are neither legal documents nor land surveys, and must not be used as such. Official records may be referenced at most BLM offices. Please report any errors in the data to the BLM office from which it was obtained. The BLM should be cited as the data source in any products derived from these data. Any Users wishing to modify the data should describe the types of modifications they have performed. The User should not misrepresent the data, nor imply that changes made were approved or endorsed by BLM. This data may be updated by the BLM without notification.
Spatial Reference Information
Horizontal Coordinate System
Reference system from which linear or angular quantities are measured and assigned to the position that a point occupies.
Coordinate System Details
Geographic coordinate system
Latitude resolution: 8.98315284119521e-009
Longitude resolution: 8.98315284119521e-009
Geographic coordinate units: Decimal Degrees
Geodetic model
Horizontal datum name: D North American 1983
Ellipsoid name: GRS 1980
Semi-major axis: 6378137.0
Denominator of flattening ratio: 298.257222101
Spatial Domain
The geographic areal domain of the data that describes the western, eastern, northern, and southern geographic limits of data coverage.
Bounding Coordinates
In Unprojected coordinates (geographic)
Boundary Coordinate
West -125 (latitude)
East -116 (latitude)
North 49.5 (longitude)
South 41.5 (longitude)
Data Structure and Attribute Information
Attributes of FIRE_POINT
Detailed descriptions of entity type, attributes, and attribute values for the data.
Description:
Points of origin for wildfires
Source:
BLM
Attributes
OBJECTID
Definition:
Internal feature number.
Attribute values: Sequential unique whole numbers that are automatically generated.
Attribute definition source:
Esri
UNIT_ID
Definition:
The unit identifier for the agency that has primary protection responsibility at the point of origin at the time of the incident.  The administrative unit at the fire's point of origin. Domain values to lengthy to list. See Data Standard for complete list.
Attribute definition source:
NWCG
SHAPE
Definition:
Feature geometry.
Attribute values: Coordinates defining the features.
Attribute definition source:
Esri
FIRE_NUM
Definition:
Official fire incident number assigned at dispatching office.  Obtained from Wildcad application. A four to six digit number assigned to a fire by the reporting unit that uniquely identifies an incident for a particular local fire management organization within a particular calendar year.  
Attribute definition source:
NWCG
FIRE_CODE
Definition:
Cost accounting tracking number assigned by the FireCode application.  For the BLM, pre-Fiscal Year 2004 (prior to the FireCode system), this is the fire number assigned to the incident by the reporting office.
Attribute definition source:
NWCG
FIRE_NAME
Definition:
The name assigned to an incident; assigned by responsible land management unit.
Attribute definition source:
NWCG
COMPLEX_NAME
Definition:
Name of complex.  Applicable only if fire was incorporated into a complex at any point before declared contained.  A complex is two or more incidents located in the same general area which are assigned to a single incident commander or unified command.  Incidents are an occurrence, either human-caused or natural phenomenon, that requires action or support by emergency service personnel to prevent or minimize loss of life or damage to property and/or natural resources.
Attribute definition source:
NWCG
FIRE_YEAR
Definition:
The year in which the fire occurred.  In YYYY format.
Attribute definition source:
NWCG
INC_ID
Definition:
A unique identifier generated for each wildland fire. Concatenation of fire year, FIRE_UNIT_ID, and FIRE_NUM yyyy-SSUUUU-xxxxxx yyyy = calendar year SSUUUU = FIRE_UNIT_ID xxxxxx = local incident identifier (FIRE_NUM) 
Attribute definition source:
NWCG
WFMI_ID
Definition:
The Unique Identifier (FireID) assigned to each fire in the Wildland Fire Management Information system (DOI fires only).
Attribute definition source:
WFMI (Wildland Fire Management Information)
LOCAL_NUM
Definition:
Local identifying number (code) for a fire.  Legacy number or number used prior to assignment of official FIRE_NUM.
Attribute definition source:
NWCG
FIRE_DSCRV_DATE
Definition:
The date the fire was confirmed to exist or was reported as discovered.  In YYYYMMDD format.  UNKNOWN is an allowable entry.
Attribute definition source:
NWCG
BLM_ORG_CD
Definition:
A combination of the BLM administrative state and field office which has administrative responsibility for the spatial entity.  This includes which office covers the entity for planning purposes and which office is the lead for GIS edits.  Another agency or individual may have the physical management responsibility for the on-the-ground entity.  This field applies particularly when a spatial entity crosses resource area or district boundaries and the administrative responsibility is assigned to one or the other rather than splitting the spatial unit.  Similarly, OR/WA BLM may have administrative responsibility over some area that is physically located in Nevada, Idaho, and California and vice versa.  When appropriate, the office can be identified only to the district or even the state level rather than to the resource area level.
Attribute domain values
Value Definition
OR000
Oregon/Washington BLM
Definition Source:
BLM
ORB00
Burns District Office
Definition Source:
BLM
ORB05
Three Rivers Field Office
Definition Source:
BLM
ORB06
Andrews Field Office
Definition Source:
BLM
ORC00
Coos Bay District Office
Definition Source:
BLM
ORC03
Umpqua Field Office
Definition Source:
BLM
ORC04
Myrtlewood Field Office
Definition Source:
BLM
ORE00
Eugene District Office
Definition Source:
BLM
ORE05
Siuslaw Field Office
Definition Source:
BLM
ORE06
Upper Willamette Field Office
Definition Source:
BLM
ORL00
Lakeview District Office
Definition Source:
BLM
ORL04
Klamath Falls Field Office
Definition Source:
BLM
ORL05
Lakeview Field Office
Definition Source:
BLM
ORM00
Medford District Office
Definition Source:
BLM
ORM05
Butte Falls Field Office
Definition Source:
BLM
ORM06
Ashland Field Office
Definition Source:
BLM
ORM07
Grants Pass Field Office
Definition Source:
BLM
OR08
Glendale Field Office
Definition Source:
BLM
ORP00
Prineville District Office
Definition Source:
BLM
ORP04
Central Oregon Field Office
Definition Source:
BLM
ORP06
Deschutes Field Office
Definition Source:
BLM
ORR00
Roseburg District Office
Definition Source:
BLM
ORR04
Swiftwater Field Office
Definition Source:
BLM
ORR05
South River Field Office
Definition Source:
BLM
ORS00
Salem District Office
Definition Source:
BLM
ORS04
Cascades Field Office
Definition Source:
BLM
ORS05
Marys Peak Field Office
Definition Source:
BLM
ORS06
Tillamook Field Office
Definition Source:
BLM
ORV00
Vale District Office
Definition Source:
BLM
ORV04
Malheur Field Office
Definition Source:
BLM
ORV05
Baker Field Office
Definition Source:
BLM
ORV06
Jordan Field Office
Definition Source:
BLM
ORW00
Spokane District Office
Definition Source:
BLM
ORW02
Wenatchee Field Office
Definition Source:
BLM
ORW03
Border Field Office
Definition Source:
BLM
Attribute definition source:
BLM
CONTROL_DT
Definition:
The date the wildfire is surrounded by fireline or natural features such that its burning potential is reduced to a point that it no longer threatens further spread or resource damage under foreseeable conditions.  UNKNOWN is an allowable entry.   In YYYYMMDD format.
Attribute definition source:
NWCG
DISC_TIME
Definition:
Time the fire was discovered expressed as Universal Time Co-Ordinated time.  Also referred to as Zulu time.  For example, 11:01 a.m. Pacific Standard time is 1901 Zulu.  See http://navysite.de/what/zulu.htm for more information and a conversion table.
Attribute definition source:
BLM
OUT_DATE
Definition:
The date when all observable combustion has ceased or there is no risk that the fire will become active again and require additional control or management actions.  UNKNOWN is an allowable entry.
Attribute definition source:
NWCG
CAUSE_CAT
Definition:
The general circumstance which caused a fire or set the stage for its occurrence (Human vs Natural).
Attribute domain values
Value Definition
Unknown
Cause of the fire is not known
Definition Source:
BLM
Human
Fire was caused by humans
Definition Source:
BLM
Natural
Fire was naturally caused (e.g., lightning)
Definition Source:
BLM
Attribute definition source:
BLM
CAUSE_DET
Definition:
More detailed description of the cause of a fire than what is provided in CAUSE_CAT.
Attribute definition source:
BLM
CLASSIFIER
Definition:
Name (mixed case, first and last) of the person or agency who provided the fire perimeter or point coordinates.  For FIRE_POINT, this may be the name of the national database point coordinates were downloaded from.
Attribute definition source:
BLM
COORD_SRC
Definition:
The actual source of the GIS coordinates for the points.  If the line is copied from another theme, and already has COORD_SRC, it should be reviewed and may need to be changed for use in this dataset.
Attribute domain values
Value Definition
CADNSDI
Lines from or snapped to the CADNSDI dataset
Definition Source:
BLM
CFF
Lines duplicated or buffered from Cartographic Feature Files
Definition Source:
BLM
DEM
Digital Elevation Model (30m or better accuracy) used for creation of contours
Definition Source:
BLM
DLG
Lines duplicated or buffered from (24K scale accuracy) USGS Digital Line Graphs Typical Accuracies (40 feet)
Definition Source:
BLM
DIS
Lines generated to connect discontinuous features
Definition Source:
BLM
DOQ
Screen digitized linework over Digital Orthoquad backdrop
Definition Source:
BLM
DRG
Screen digitized linework over Digital Raster Graphic (USGS) backdrop
Definition Source:
BLM
GCD
Lines snapped to Geographic Coordinate Database Points
Definition Source:
BLM
GPS
Lines obtained from a Global Positioning System device
Definition Source:
GPS
IMG
Linework derived from interpretation of non-photographic imagery
Definition Source:
BLM
MAP
Digitized line work from hardcopy map
Definition Source:
BLM
MTP
Lines duplicated from Digital Master Title Plat
Definition Source:
BLM
SOURCEL
Source layer from BLM GIS
Definition Source:
BLM
SRV
Survey methods were used to create the linework
Definition Source:
BLM
TIGER
Tiger data
Definition Source:
BLM
TRS
Coordinates only given as a legal description (township, range,section)
Definition Source:
BLM
UNK
Unknown coordinate source
Definition Source:
BLM
WODDB
WODDB (Western Oregon Digital Database) Photogrammetric
Definition Source:
BLM
Attribute definition source:
BLM
COORD_DATE
Definition:
Date the coordinates, whose source is listed in COORD_SRC, were collected. In YYYYMMDD format.
Attribute definition source:
BLM
ACCURACY_FT
Definition:
How close, in feet, the spatial GIS depiction is to the actual location on the ground.  There are several factors to consider in GIS error:  scale and accuracy of map-based sources, accuracy of GPS equipment, and the skill level of the data manipulators.  A value of "0" indicates no entry was made.  This is the correct value when the COORD_SRC is another GIS theme (Digital Line Graph, Cadastral National Spatial Data Infrastructure and Digital Elevation Model) because the accuracy is determined by that theme.  However, if COORD_SRC is MAP (digitized from a paper map) or GPS, a value of "0" indicates a missing value that should be filled in either with a non-zero number or "-1."  A value of "-1" indicates that the accuracy is unknown and no reliable estimate can be made.
Attribute definition source:
BLM
TOT_ACRES_RPTD
Definition:
Official final reported burned acres.  May differ from GIS_ACRES total.
Attribute definition source:
NWCG
COMMENTS
Definition:
Free text for comments about the fire point
Attribute definition source:
BLM
VERSION_NAME
Definition:
Name of the corporate geodatabase version previously used to edit the record.
Attribute definition source:
BLM
GLOBALID
Definition:
Automatically generated ID number
Attribute definition source:
ESRI
SDTS Feature Description
Description of point and vector spatial objects in the data using the Spatial Data Transfer Standards (SDTS) terminology.
Spatial data transfer standard (SDTS) terms
Feature class
Type: Entity point
Count: 11990
Data Quality and Accuracy Information
General
Information about the fidelity of relationships, data quality and accuracy tests, omissions, selection criteria, generalization, and definitions used to derive the data.
Logical consistency report:
FIRE ORIGIN POINTS (FIRE_POINT) Description: Instance of Fire group. Geometry: Simple, not multi-part points. Topology: No topology enforced. Integration Requirements: Each FIRE_POLY perimeter may have zero or one FIRE_POINT and the point must fall within the polygon.
Data Source and Process Information
Data Sources
Information about the source data used to construct or derive the data.
Data source information
Unknown
Title: S_R06.FireHistoryPt
Originators: Data Resource Management/Fire & Aviation, Pacific Northwest Region, Forest Service, U.S. Department of Agriculture
Publication date: 20071228
Map scale denominator: 24000
Media: onLine
Source contribution:
Geospatial data obtained from Forest local Geographic Information System data library. Some forests maintain fire data, for years before 1970, when Kansas City Fire Occurrence Database was established.
Process Steps
Information about events, parameters, tolerances and techniques applied to construct or derive the data.
Process step information
Process Step 1
Process description:
The following information was taken from individual forests metadata, only where metadata was attached to data, when it was submitted to DST. GIFFORD PINCHOT NATIONAL FOREST; Fire History points for 2006 were summarized from Fire Reports into FIRESTAT 2006 for GIS.xls by Dispatch (Amy Davis). Location information was in degrees, minutes, seconds or Township, Range, Section (fractions) descriptions. Amy used a conversion tool on her PC to convert to decimal degrees and entered the latitude/longitudes into the .xls file. Irene Ward formatted a copy of the .xls (fires06.xls) using Excel and MS Access to add and define the standard data fields, populated Agency, Data_Source, Cause (a numeric field from the initial Cause text field), Size_Class from Reported_Acres field, and formatted Fire_Day and Fire_Month with leading zeros, and Fire_Name using the PROPER function to have first letter of a word in upper case, the rest in lower case (and checked for the other syntax requirement for fire names). The resulting event table (Fires06) was brought into ArcMap, for Display X,Y. Had first added SDE feature class S_R06.FireManagement/S_R06.FireHistoryPt in ArcMap, so could use it's spatial reference when exporting the point events. Exported to a personal geodatabase for loading into a template personal geodatabase created per draft Fire History Edit Guide, March 27, 2007 from the R6 DRM Data Standardization Team (Colleen Williams). MOUNT HOOD NATIONAL FOREST; Jaimie Bradbury acquired 3 point shapefiles by year (2004, 2005, 2006) in UTM10 NAD27 from Jim Wrightson, Fire, Mt. Hood NF HQ, as queried and generated from the National Fire Occurrence Database, NIFMID. Jaimie projected shapefiles to Albers NAD83 and imported each year into separate point feature class with existing attribute fields in working personal geodatabase. Created new point feature class in final personal geodatabase, imported National GIS Data Dictionary defined fields from standardized forehis_pt coverage. Loaded separate year point feature classes from working personal geodatabase into single point feature class in final personal geodatabase, mapping fields available to match National GIS Data Dictionary fields. In ArcMap, joined working personal geodatabase tables for each fire occurrence year to the fire history point feature class in the final personal geodatabase, calculated value for NIFMID_LNK by concatenating fields as described in National GIS Data Dictionary. NIFMID number was not provided with original data. Calculated FIRE_DAY, FIRE_MONTH, and FIRE_YEAR values by parsing DISC_DATE field using VBScript function DatePart (interval, date_field). Added two missing points by creating event layer from longitude, latitude x,y coordinates in decimal degrees supplied by Jim Wrightson. Saved as shapefile with original shapefiles. Projected to Albers NAD83, saved with other projected shapefiles, imported into working personal geodatabase, and loaded into point feature class in final personal geodatabase. Fire history corporate dataset update was submitted to Data Standardization Team (Colleen Williams) 3/30/2007. UMPQUA NATIONAL FOREST; Points were imported from a spreadsheet using decimal degrees, converted to a shapefile, and then a coverage. Spreadsheet retrieved from fire database. MALHEUR NATIONAL FOREST; The points layer was developed through the FAMWEB, KC Fast, fire, fire reports. Choose the "Corporate GIS for Administrative Unit format". The file that is produced contains all of the mandatory data fields required by the corporate data standard. A username and password is required to use this site. In most cases the Fire Management Officer or Dispatcher on the Forest unit will have access to the web site and know how t run the query. Once the file has been downloaded to a PC, run the fire-hispt_con.aml. The aml is designed to process data that has been downloaded from the databasea dn will create an output "GIS" coverage. Data from the south end of the forest (within the BIFZ fire planning unit) up to date through 2004. Data from the north end is only complete through 2002. Process Steps and Process Description: 20050210 - Rick Momsen, Data Standardization Team contractor through Titan Corp.; standardized coverage to agree with the GIS Core Data Dictionary. 20050523 - Dave Stockdale, GIS/Data Services Analyst on the Malheur National Forest; copied to double precision. 20050715 - Dave Stockdale, GIS/Data Services Analyst on the Malheur National Forest; Updated with fire points from BLM Burns District (Stacy Fenton). Layer created from various sources: Burns BLM, Malheur NF, Snow Mountain District, NIFMID/KCFAST national database. Since almost all of Malheur's points from before 2002 were hand-drawn ("HD"), I decided to use the BLM layer which had a more accurate location. To make it easier I also used the BLM 2002 NIFMID locations. I added the FS attributes to the BLM layer and calculated the values in from BLM. Where the locations overlapped, I deleted the FS point. On the NIFMID points I manually calculated the values from the FS coverage onto the BLM point. Snow Mountain fire points before 1993 were added from the Snow Mountain library fire_pcha and fire_pt layers: from 1985-92 from pcha as that was more accurate; before 1985 from fire_pt. The final steps were to clip the BLM layer to the Malheur watershed extent, remove the BLM attributes, and merge the BLM layer into the firehis_pt coverage. 20060327 - Dave Stockdale, GIS/Data Services Analyst on the Malheur National Forest; Reprojected to Region 6 Albers NAD83 projection. 20070323 - Teri Corning-Sevey, GIS/Data Services Specialist on the Malheur National Forest; Updated with 2006 fire season points. UMATILLA NATIONAL FOREST; Completeness Report: All fires less than ten acres and start locations for larger fires are shown in this coverage to the effect that fire locations where given to the Umatilla GIS for input. The coverage is completed each year for each year to follow. Process Steps and Process Description: 20040429 - Andrew Lacey, Forest GIS Coordinator on the Umatilla National Forest; Pathfinder office gps files, other venders gps files, ascii text files of lat and long coordinates from kcfast, heads up digitizing using DRGS. Year update process is to pull new locations from KCFAST database. You need to have a WIMS username and password. Go to http://famweb.nwcg.gov/ and select KCFAST, Fire, Fire Reports. Put in administrative unit (0614), begin year and end year. Then select corporate GIS for Administration unit. The report will go to a FTP site and retrieve from there. Take text file report and add column headings by inserting a new text line at start of file. Project file using ArcCatalog assuming a geographic projection with a NAD83 Datum from North America. Then reproject to local projection. Match PAT table and append to existing coverage. 20041222 - Andrew Lacey, Forest GIS Coordinator on the Umatilla National Forest; Added in 2004 year fire start locations. All locations were derived from the data in the KCFast database. All locations were derived from the Latitude and Longitude stored in the database for the 2004 fires. All Lat and Long were assumed to be in NAD83 Geographic and then reprojected to the local projection. 20050627 - Andrew Lacey, Forest GIS Coordinator on the Umatilla National Forest; Dropped redundant items that are also in the PCHA database. Corrected the locations of some points where the Lat and Long values were incorrectly entered. 20060301 - Andrew Lacey, Forest GIS Coordinator on the Umatilla National Forest; Reprojected to Region 6 Albers NAD83 projection. 20070309 - Andrew Lacey, Forest GIS Coordinator on the Umatilla National Forest; Added calendar year 2005 and 2006 fires from Information in the NIFMID and or KCFast interface. Points were reprojected from a NAD83 Geographic Projection into the local projection. COLVILLE NATIONAL FOREST; Process Steps and Process Description: 19990112 - Dave Larson on the Colville National Forest; Colville NF - FOC Oracle database on DG converted to Info and added to FOC.pat. 20010307 - Janice Berube on the Colville National Forest; Added fire occurrence points for 1999 and 2000 - Colville NF. 20040121 - Janice Berube on the Colville National Forest; Fire starts added for 2002 and 2003 (with Nancy Cassel) - Colville NF. 20050121 - Rick Momsen, Data Standardization Team contractor through Titan Corp.; standardized coverage to agree with the GIS Core Data Dictionary. Metadata updated. 20050128 - Cindy Potestio on the Colville National Forest; Fire starts for 2004 (Colville NF) added (with Jimmy Corvino), missing information added for fires back to 1994, metadata updated. 20060119 - Janice Berube, GIS/Data Services Specialist on the Colville National Forest; Fire starts for 2005 (Colville NF) added (with Nancy Cassel). Matched attribute fields to a R6 data standardization copy by Colleen Williams requested by Dale Guenther for the National Data Warehouse on 07/29/05. Removed SO- from local_number. Deleted USF0608 points outside of Colville NF administrative boundary. Changed Agency field for BIA points. Newport District added 2002/2003 BIA points. These points have missing attributes which will be completed at a later date. 20060320 - Cindy Potestio, GIS/Data Services Analyst on the Colville National Forest; Reprojected to Region 6 Albers NAD83 projection.
Data Source used
Each individual National Forest submitted data files to DST, for the Initial Standardization Phase and the First Major Update Cycle. Where metadata was present in forest covers, the Process Step and Process Description was summarized here, for each forest having metadata.
Process Step 2
Process description:
Initial Standardization Phase was completed in 2005 and the First Major Update Cycle for 2006 data was completed in 2007. During the Initial Standardization Phase and the First Major Update Cycle, all Fire History data was submitted to Region 6 Data Resource Management (DRM) Data Standardization Team (DST), by each Forest's GIS Fire Data Manager, from Region 6, in ArcInfo coverage export file format or as shapefiles. During the update process the same file formats were received with the addition of personal geodatabases. Data files were received via e-mail or downloaded from the FTP server, ftp2.fs.fed.us. Data was re-formatted, standardized, and loaded into the Enterprise Fire History Region 6 feature dataset S_R06.FireManagement in SDE.
Organization: Data Standardization Team, Data Resource Management, Pacific Northwest Region, Forest Service, U.S. Department of Agriculture
Person: Colleen Williams
Position: Database Standardization Specialist
Phone: 541-523-1253
Email: cmwilliams@fs.fed.us
Address type: mailing
Address:
Wallowa-Whitman National Forest
City: Baker City
State or Province: OR
Postal code: 97814
County: US
Process date: 20071228
Process Step 3
Process description:
1. Created Fire_History geodatabase with feature classes, attributes, and domains according to the Fire History data standard. 2. Populated FIRE_POINT feature class with fire origin point locations submitted by Districts, and adjusted attributes as needed. Attribute completeness varied greatly across the submissions. 4. Identified and removed true duplicates.
Organization: Bureau of Land Management
Person: Barbara W. Haney
Position: GIS Specialist
Phone: 503-808-2741
Email: bhaney@blm.gov
Address type: mailing
Address:
P.O. Box 2965
City: Portland
State or Province: OR
Postal code: 97208
Process date: 20130501
Data Distribution Information
General
Description of the data known by the party from whom the data may be obtained, liability of party distributing data, and technical capabilities required to use the data.
Distribution liability:
The BLM assumes no responsibility for errors or omissions. No warranty is made by the BLM as to the accuracy, reliability, or completeness of these data for individual use or aggregate use with other data; nor shall the act of distribution to contractors, partners, or beyond, constitute any such warranty for individual or aggregate data use with other data. Although these data have been processed successfully on computers of BLM, no warranty, expressed or implied, is made by BLM regarding the use of these data on any other system, or for general or scientific purposes, nor does the fact of distribution constitute or imply any such warranty. In no event shall the BLM have any liability whatsoever for payment of any consequential, incidental, indirect, special, or tort damages of any kind, including, but not limited to, any loss of profits arising out of the use or reliance on the geographic data or arising out of the delivery, installation, operation, or support by BLM.
Distribution Point of Contact
Contact information for the individual or organization distributing the data.
Organization: Bureau of Land Management
Person: Eric Hiebenthal
Position: GIS Data Management Specialist
Phone: 503-808-6340
Fax: 503-808-6419
Email: ehiebent@blm.gov
Instructions:
contact instructions
Address type: mailing
Address:
P.O Box 2965
City: Portland
State or Province: OR
Postal code: 97208
County: US
Standard Order Process
Common ways in which data may be obtained.
Fees: Contact distributor.
Ordering instructions:
Data are only available through the Oregon/Washington State office of the Bureau of Land Management.
Metadata Reference
Metadata Date
Dates associated with creating, updating and reviewing the metadata.
Last updated: 20130503
Last metadata review date: 20130823
Metadata Point of Contact
Contact information for the individual or organization responsible for the metadata information.
Organization: Bureau of Land Management, Oregon State Office
Person: Roger Mills
Position: GIS Specialist
Phone: (503) 808-6340
Fax: (503) 808-6419
Telecommunications Device or Teletypewriter (TDD/TTY) phone: tdd/tty phone
Email: r2mills@blm.gov
Hours of service: 8:00-4:00
Instructions:
None
Address type: mailing
Address:
P.O. Box 2965
City: Portland
State or Province: OR
Postal code: 97208
County: US
Metadata Standards
Description of the metadata standard used to document the data and reference to any additional extended profiles to the standard used by the metadata producer.
Standard name: FGDC Content Standard for Digital Geospatial Metadata
Standard version: FGDC-STD-001-1998
Time convention: local time
FGDC Plus Metadata Stylesheet
Stylesheet: FGDC Plus Stylesheet
File name: FGDC Plus.xsl
Version: 2.0
Description: This metadata is displayed using the FGDC Plus Stylesheet, which is an XSL template that can be used with ArcGIS software to display metadata. It displays metadata elements defined in the Content Standard for Digital Geospatial Metadata (CSDGM) - aka FGDC Standard, the ESRI Profile of CSDGM, the Biological Data Profile of CSDGM, and the Shoreline Data Profile of CSDGM. CSDGM is the US Federal Metadata standard. The Federal Geographic Data Committee originally adopted the CSDGM in 1994 and revised it in 1998. According to Executive Order 12096 all Federal agencies are ordered to use this standard to document geospatial data created as of January, 1995. The standard is often referred to as the FGDC Metadata Standard and has been implemented beyond the federal level with State and local governments adopting the metadata standard as well. The Biological Data Profile broadens the application of the CSDGM so that it is more easily applied to biological data that are not explicitly geographic (laboratory results, field notes, specimen collections, research reports) but can be associated with a geographic location. Includes taxonomical vocabulary. The Shoreline Data Profile addresses variability in the definition and mapping of shorelines by providing a standardized set of terms and data elements required to support metadata for shoreline and coastal data sets. The FGDC Plus Stylesheet includes the Dublin Core Metadata Element Set. It supports W3C DOM compatible browsers such as IE7, IE6, Netscape 7, and Mozilla Firefox. It is in the public domain and may be freely used, modified, and redistributed. It is provided "AS-IS" without warranty or technical support.
Instructions: On the top of the page, click on the title of the dataset to toggle opening and closing of all metadata content sections or click section links listed horizontally below the title to open individual sections. Click on a section name (e.g. Description) to open and close section content. Within a section, click on a item name (Status, Key Words, etc.) to open and close individual content items. By default, the Citation information within the Description section is always open for display.
Download: FGDC Plus Stylesheet is available from the ArcScripts downloads at www.esri.com.